Bluetooth module for hörbert
Bluetooth module for hörbert
From: 59,90 €
With the Bluetooth module your hörbert becomes even more flexible.
Are you travelling by car or train and want to listen to your songs and radio plays undisturbed with headphones? No problem with the hörbert Bluetooth module! Switch on Bluetooth headphones, switch on hörbert and you’re ready to go. Wireless – for the safety of your child.
By the way: with the Bluetooth module 2 headphones can be connected simultaneously with hörbert. For “4-ear pleasure”.
This module turns your hörbert into a high-quality Bluetooth loudspeaker with top sound quality. Stream your favourite tracks directly to any Bluetooth-capable audio source (e.g. your smartphone). Pure flexibility – without apps, subscriptions or cloud systems. As always with hörbert – you decide which content to play.
The hörbert automatic shut-off (sleep timer) is already integrated in the Bluetooth module. This turns hörbert into a great sleep aid.
Bluetooth electronics module for retrofitting hörbert.
Including automatic switch-off. Various selectable switch-off times.
Selectable battery protection
Shipping weight: 120 g
1 x electronics, ready for installation
1 x scratch protection for installation
You don’t have Bluetooth headphones for your child yet?
We recommend these: JBL JR300BT
Kid-sized wireless on-ear headphones:
JBL Safe Sound <85 dB
Specially designed for children
Age recommendation of the manufacturer: from 3 years
Different colour editions (blue/orange & pink)
Thanks to the help of hundreds of our fans who supported our Kickstarter campaign in 2019, this Bluetooth module was developed ready for series production.
Thanks a lot for paving the way for new possibilities.
Every hörbert starting from the year 2011 can be retrofitted:
For the hobbyists among you, we have our installation instructions as video, the user manual and a step-by-step guide:
We can also install it for you:
You do not have the time or patience to do the installation yourself?
No problem – get in touch with us, so we can install the module for you for a small fee.
Due to the very high power consumption of these cards, the Bluetooth module may generate noise in the standard playback mode.
This does not happen with our supplied cards. We therefore recommend the use of the original hörbert memory card, so your hörbert will run longer.
A Transcend card tested by us (16 GB Class 10) had a much higher power consumption than our original cards.
This is of course bad for the runtime.
If you don’t want to do without your memory card, please contact our support team (email@example.com), because we can also upgrade your hörbert board for a small service fee if you wish, so that even such power-hungry memory cards can be operated almost without noise.
Note: Unfortunately, we cannot make any valid functional statements for third-party cards, as the manufacturing methods and what is installed inside are constantly changing. We purchase our own memory cards directly from the manufacturer according to our specifications.
- Please check the following first: Does hörbert play normally in standard hörbert mode via its built-in speaker when you switch it on? If so, the module has at least been installed correctly.
- If you want to use hörbert as a Bluetooth speaker, you have to switch it on and off immediately.
IMPORTANT: please leave hörbert switched off and DO NOT switch it on again. Now the inside LED display of the Bluetooth module flashes twice per second and a beep sounds to indicate that hörbert is now in Bluetooth speaker mode.
You now have one minute to find hörbert in the list of Bluetooth devices on your phone and pair it with your phone.
You can start a playlist on your phone to play it via hörbert.
- The phone shows a connection to hörbert, but the playlist is not played via hörbert, but via the phone.
— Proactively remove hörbert from the list of Bluetooth playback devices in your phone (e.g. by using the command “Ignore this device”) and let the phone search for your hörbert again and pair with it.
— Is there a setting directly in the app on your phone that ensures that the phone is used as the playback device and does not listen? If you are not sure, check the information on your phone. Our service team will also be happy to help you. Contact.
- Does another Bluetooth device “grab” the connection to your mobile phone? For example, switched on Bluetooth headphones, a Smartwatch, a tablet or the neighbor’s device? Please disconnect these devices and/or go to another location first.
The first pairing of headphones with hörbert can take a minute, especially when there are many other Bluetooth devices nearby.
The headphone mode only searches for hörbert headphones in the first 60 seconds after switching on hörbert. In the headphone mode, the hörberts loudspeaker switches off as soon as the sound is heard in the headphones. If this does not work the first time, it will work the second (or third) time.
Please proceed as follows to find the solution:
- if the headphones work with other Bluetooth devices, they can be switched to
Example successfully pairing with a Bluetooth mobile phone ?
If no: please charge the headphones fully first. If they still do not work, contact the dealer where you bought the headphones. There may be a defect in the headphones and the headphones must be replaced.
If so: go to steps 2 to 6:
- Are switches 5 and 6 (Bluetooth and pairing) activated?
Please do not activate any switches on the “Mouse Piano” of the Bluetooth module unless hörbert is switched off. If switch no. 6 (Pairing) is deactivated, e.g. when hörbert is switched on, under certain conditions all pairings stored by hörbert will be deleted. (See point 184.108.40.206 of our operating instructions for the Bluetooth module).
- Do other Bluetooth-compatible ambient devices possibly try to access the headphones? Please switch off the Bluetooth mode and/or go to another location for all Bluetooth environment devices (e.g. mobile phone, tablet, computer).
- If your headphones have their own volume control, please remember that you may need to turn up the volume here if you cannot hear anything through the headphones. Also, with the hörbert, please make sure that its volume knob is not set to very low.
- if the pairing does not work after one minute, please switch off all devices again and try the process a second or even third time:
- Switch on the headphones. Bluetooth mode the headphones must be activated. Please check for each headphone model whether the corresponding LED indicator is lit correctly or headphones say: Bluetooth/Pairing on.
- Turn on the headphones. The LED of the Bluetooth module must flash twice per second. Now hörbert will search for the headphones for 60 seconds. Please also give him this time before you switch him and the headphones off again and start the process again if it did not work right away.
- If all tips do not work, our service team will be happy to help you. Contact
How can I distinguish between the two hörberts of my children in the list of Bluetooth devices in my mobile phone? Both appear as “hörbert”.
It is possible to change the name of paired devices in your Bluetooth transmitter.
You can find the necessary tips for this under the links below, depending on which device you use:
www.support.apple.com (changing the name of a Bluetooth device):
www.techify.de (rename paired Bluetooth devices on Android): https://link.hoerbert.com/5pUwQ
www.genuine-lamps.com (how to rename Bluetooth devices on windows):
The strength of the electromagnetic radiation depends on the transmitting power of the devices.
The power class of the Hörbert Bluetooth module is class 2, i.e. our Bluetooth connections are all class 2 with a maximum transmission power of 2.5 mW (+4 dBm). The hörbert Bluetooth module thus complies with the recommended SAR maximum values in any case due to the very low transmission power.
That depends on the environment, whether there are obstacles, such as walls… in the way. However, the range can usually be about 15 m.
In hörbert mode you simply listen to the content with your hörbert — as usual. Just switch on your hörbert and it starts playing. Your hörbert will consume a little more power in this mode, and it will therefore not reach its 57-hour runtime (as measured by Stiftung Warentest). This is because the sound has to be looped through the Bluetooth module, which also needs a little power.
This slight buzzing, which is usually only heard in silent moments and only in piano mode, is due to the fact that the sound has to be “looped through” the Bluetooth module.
Noise can be minimized if all cables leading to the Bluetooth module are first twisted together as shown in the installation video and instructions.
Note: The buzzing sound may be amplified when using memory cards other than our original ones, as some cards draw more current than others.
The existing automatic switch-off must be removed to accommodate the Bluetooth module. Unfortunately we do not have enough connectors on the board to mount both additional electronics. Therefore, we have integrated the automatic switch-off in the Bluetooth module, so that the Bluetooth customers don’t have to do without the sleep timer.
If you would like to send us your intact and undamaged automatic switch-off device in exchange, you will receive an exclusive wooden Hörbert memory card socket worth 12.95 EUR. If you are interested, please contact our service team.
You have correctly installed the Bluetooth module if hörbert plays correctly via its own loudspeaker in standard hörbert mode, if you switch it on as usual and if the volume control on hörbert’s rotary control works.
If you order a new hörbert with a BT module as an accessory, we will of course install the Bluetooth module ex works.
For all other cases, an installation video and illustrated installation instructions are available at
For shipping reasons, the Bluetooth module arrives with the fastening nut screwed onto the toggle switch. This nut must be unscrewed prior to installation and then screwed back over the toggle switch at the top of hörbert to secure the module. See instructions.
Yes, we have developed the Bluetooth module as a retrofit option for every hörbert since 2011. No one has to say goodbye to their faithful companion, because every hörbert can be retrofitted.